Teradek Bolt 3000 XT 3G-SDI/HDMI Wireless Transmitter and Receiver Set

/, Camera Support, Video Players & Location Recording, Monitors, Projectors & Screens/Teradek Bolt 3000 XT 3G-SDI/HDMI Wireless Transmitter and Receiver Set

Teradek Bolt 3000 XT 3G-SDI/HDMI Wireless Transmitter and Receiver Set

Rental price per day $ 300.00

  • Up to 3000′ Range Line of Sight
  • Supports up to 1080p60 Resolution
  • Backwards Compatible with Select Systems
  • 3G-SDI & HDMI Inputs/Outputs

Description

The Teradek Bolt 3000 XT 3G-SDI/HDMI Wireless Transmitter and Receiver Set includes one transmitter and one receiver. This enables you to immediately start transmitting up to 1080p60 video from either an SDI or HDMI source. The zero latency transmitter receiver pair features 3000′ line-of-sight transmission distance when used together. You can send and receive visually lossless 3G-video signals from a Bolt 3000 transmitter with zero latency. The transmitter features cross conversion, so you take an SDI signal in and loop out either an SDI or HDMI signal to your on-camera monitor.

The receiver also features both SDI and HDMI outputs, and the system supports digital SD and HD signals. Although the inputs and outputs support a variety of HD signals, in both 50 and 60 Hz standards, as well as 480i and 576i. However, 480p and 576p are only supported via HDMI. You can transmit up to three other receiver models such as Bolt 3000 XT, Sidekick II, or 703 Bolt 703, and the transmitter can support up to four receivers. The built-in AES 128-bit encryption helps to keep your transmitted video safe from prying eyes.

Teradek Bolt 3000 XT 3G-SDI/HDMI Wireless Transmitter

With the Teradek Bolt 3000 XT 3G-SDI/HDMI Wireless Transmitter you can transmit visually lossless 3G video signals to a Bolt 3000 receiver with zero latency. The Bolt XT is also compatible with the Sidekick II and 703 Bolt. The transmitter unit itself can be secured to a camera or other SDI/HDMI video source via a built-in 1/4″-20 threaded hole, as well as two M3 threaded holes. The included antennas provide a powerful signal that can travel up to 3000′ line-of-sight.

A shoe mount is included for attaching to cameras without 1/4″-20 threads. For convenience, both a standard BNC cable and HDMI cable are included so you can plug in right out of the box. Power can be provided using the integrated 2-pin connector via the included D-Tap power cable. The transmitter supports up to four receivers and built-in AES 128 encryption protects your video from prying eyes, while noise rejection helps keep your video clean even when working around 2.4 and 5.8 GHz signals.

Backward compatible with Teradek’s universal receivers Sidekick II and 703 Bolt, which can receive Bolt 3000 XT signals up to 300′ away
HDMI and 3G-SDI inputs, with 3G-SDI loop-through output on transmitter
SDI ancillary data support for metadata, timecode, and start/stop flags from certain camera manufacturers
1/4″-20 and M3 mounting points

Teradek Bolt 3000 XT 3G-SDI/HDMI Wireless Receiver

With the Teradek Bolt 3000 XT 3G-SDI/HDMI Wireless Receiver you can receive visually lossless 3G-video or HDMI signals from a Bolt 3000 transmitter with zero latency. The receiver unit itself can be secured via built-in 3/8″-16 M3 threaded holes or the built-in NATO rail.

A lightstand adapter is included for mounting on stands. For convenience, a standard HDMI cable is included, so you can plug in right out of the box. Power can be provided using the integrated 2-pin connector. A D-Tap power cable is included for attaching to a battery. The receiver can share the transmitter with up to three other receivers. It features built-in AES 128 encryption that protects your video from prying eyes, while noise rejection helps keep your video clean even when working around 2.4 and 5.8 GHz signals.

The receiver includes built-in cross conversion and Teradek’s proprietary software utilities, including a manual frequency-selection tool, 3D LUT engine, and a 5 GHz spectrum analyzer to keep an eye on interference in your area.
The receiver features an HDMI output as well as dual 3G-SDI outputs.
An integrated NATO rail on the receiver, along with several M3 mounting points, and an ARRI compatible 3/8″-16 threaded hole with locating pin holes provide for multiple mounting options.
SDI ancillary data support: supports metadata, timecode, and start/stop flags from certain camera manufacturers.
5 included antennas for the receiver enable it to pick up signals with clarity

INSPECTION - The customer agrees that the equipment supplied by Able and listed below (The Equipment) is received in good working order and suitable for use and that the Renter is familiar with its operation. On return of Equipment Able staff will inspect all items if the Renter does not wait for inspection Able Video & Multimedia may charge Renter for any damaged found during inspection.


PAYMENT - The Renter agrees to pay Able rental charges until the equipment is returned in good working order and any other applicable charges specified in this agreement.



LATE RETURN - The Renter agrees to return the equipment to Able’s facility on time or pay extra rental charges due on a pro rata basis.


BREAKDOWN - The Renter shall notify Able Video and Multimedia of any breakdown of the Equipment and not attempt repairs. The Renter will not interfere in any way with any mechanical fittings or appliances attached to or forming part of the Equipment or, without the written consent of Able, have any repairs effected thereto by any person other than an employee of Able or such person as Able may nominate. The Renter agrees to accept Able or it’s qualified repairer’s determination as to whether the Equipment is faulty and the cause of the breakdown.


DAMAGE - The Renter agrees to pay for damage to the equipment. In the case of damage or injury (by fire, storm or through any cause whatsoever) to/by the equipment, it is agreed that the cost of repair, replacement or damages as the case may be (and any charges payable according to this agreement), shall be paid by the Renter to Able on demand. Any such charges may be deducted from a deposit (if taken) left by the Renter and the Renter shall pay the excess to Able Video and Multimedia on demand.

COMPENSATION - The customer agrees to pay for the cost of equipment lost or stolen.The Customer shall also pay to Able Video and Multimedia on demand a sum equal to the rental charges which Able Video and Multimedia could have obtained for the period from the date of commencement of the rental of the equipment damaged, lost or stolen to the date of receipt by Able Video and Multimedia of Payment of the repair or replacement.

INDEMNITY- The customer is responsible for accidents caused by use of the equipment.The Customer indemnifies, and keeps indemnified, Able Video and Multimedia in respect of its liability for personal injuries, property damages and any associated legal expenses arising out of any accident which might be caused by or contributed to by, or arise out of the use, operation or handling of the equipment during the term of rental.

RECOVERY OF EQUIPMENT - Able Video and Multimedia has the right to recover the Equipment if charges are not paid and the renter is responsible for any costs associated with the recovery process.

NO WARRANTY OR GUARANTEE – Able gives no warranty, express or implied, as to description, quality, merchantability, fitness for any particular purpose, productiveness, or any other matter of operation of the Equipment and accepts no responsibility for it’s use by the Renter. The Renter hereby waives any such remedies, warranties, guarantees or liabilities, expressed or implied, arising by law or otherwise, against Able.

GENERAL OBLIGATIONS OF CUSTOMER

The customer is responsible for pickup and delivery/return from/ to Able Video and Multimedia’s facility during business hours unless otherwise stated in this agreement. The equipment shall not be considered returned until a full inventory has been completed and any missing equipment or replacements for damaged parts have been delivered to Able Video and Multimedia’s facility.

The Customer acknowledges that all equipment rented remains the property of Able Video and Multimedia at all times and the Customer will not sell, charge, pledge or part with possession of the equipment.

The Renter shall insure, at their expense, all the Equipment at all times during the rental, for full replacement cost and for loss of use of the Equipment. Coverage must begin from before the time the Renter takes delivery of the Equipment and continue until the time the Equipment is returned and the rental expires. The Renter shall insure for risk coverage that is greater or equal to the replacement cost of all Equipment and any rental or other charges payable under this agreement, including transit/shipping, Public & other Liability Coverage, Property Insurance and Workers Compensation Insurance, prior to taking delivery of Equipment. Such insurance shall be written by reputable insurers. Notwithstanding this paragraph, the Renter shall remain primarily liable to Able for full performance under the terms and conditions of this Rental agreement and Able may enforce it’s remedies directly against the Renter without resort to their insurance.

Upon taking taken delivery of the equipment, the Renter’s responsibility includes, but is not limited to, risks while in transit, at all locations named and unnamed, and while in use, or storage at Able Video and Multimedia’s facility. The Renter’s responsibility is discharged when the equipment is returned and the rental term has expired. Equipment will not be deemed to have been returned until all of the following conditions have been met: 1) property has been brought back to the premises during normal business hours; 2) an inventory has been completed and a missing and damaged list has been compiled, if needed; and 3) the term of the Rental Contract has expired.

The Customer acknowledges having received the equipment in good working order and condition. The Customer may test the equipment at Able Video and Multimedia’s facility before taking delivery to ensure it is in good working order and condition prior to taking delivery. The Customer will use the equipment in a careful and proper manner and permit only skilled and experienced personnel to use the equipment and will not use the equipment in connection with any dangerous or hazardous activity.